Knowledge

Home > Knowledge > Content
Single Point Load Cell
Jul 27, 2016

Basic Info.

Model NO.Pattern:Single Point Type
Transform Type:Resistance StrainOut-Wire:4-Wire
Output Signal Type:Analog TypeFeature:Corrosion Resistant
Production Process:IntegrationMaterial:Metal
IP Rating:IP65Certification:CE
Customized:CustomizedUsage:Weighing Sensor
Trademark:hlhSpecification:CE, ISO9001: 2008
Origin:Dongguan, ChinaHS Code:9031809090

Product Description

        Rated load(kg): 0.5, 1, 3, 5, 6, 10, 15, 20, 25
Main features: The product is made of alloy aluminum. It is hermetically sealed with glue to IP65, surface anodized and anti-corrosion, integral structure and easy installation. The product is suit for electronic top scale, floor scale and other weighing equipment.

Parameters:

Precision : C2
Temp. effect on span(%F.S/10 °C): ±0.02
Comprehensive error(%F.S) : ±0.02
Temp. effect on zero(%F.S/10 °C) : ±0.03
Rated output(mv/v) : 2.0±0.2
Compensated temp. range( °C ) : -10~+40
Creep(%F.S/30min) : ±0.02/±0.017
Use temp. range( °C ) : -20~+60
Zero balance(%F.S) : ±1.0
Excitation voltage(V) : 9 ~12(DC)
Input resistance(Ω) : 405±10
Safe overload (%F.S) : 120
Output resistance(Ω) : 350±3
Ultimate overload (%F.S) : 150
Insulation resistance(MΩ) : ≥5000(100VDC)
Defend grade : IP65


Wiring schematic diagram:Red: Input ( + )     White: Output ( - )
Black: Input ( - )   Green: Output ( + ) 

Notes:It used 4-core shielded cable(φ5×3000mm)